Oki 4100 Printer User Manual


 
Safety
English
Safety 3
Installation Hints
Install your fax machine in a dust-free location away
from direct sunlight.
Do not plug your fax machine into a power source
shared by equipment which produces electrical
noise (i.e., air conditioners, etc.).
Leave electronic adjustments to authorized service
personnel.
The LINE terminal connects your fax machine to a
standard telephone line. To avoid damage to your
telephone system or to the fax machine, do not plug
your fax machine into anything other than a stan-
dard RJ-11C jack.
Your fax machine is intended to be grounded electri-
cally and is equipped with a three-wire grounded
power cord. For your safety, do not attempt to
defeat your power cord’s grounding plug.
The socket-outlet should be installed near the
equipment and should be easily accessible.
The TEL port on the back of the fax is only suitable
for 2 wire devices. Not all standard telephones will
respond to incoming ringing when connected to an
extension socket.
This equipment may not necessarily provide for the
effective hand-over of a call from a telephone con-
nected to the same line.
The operation of this equipment on the same line as
telephone or other equipment with audible warning
devices or automatic ring detectors will rise to bell
tinkle or noise and may cause false tripping of the
ring detector. Should such problems occur, the user
is not to contact the telephone company.
Operation and Maintenance
Use a dry cloth to clean the control panel and the
main body of the unit.
Aside from the instructions specifically mentioned
in this handbook, your fax machine is not user
4100 Fax ENGLISH 15/1/97 9:37 am Page 3