Filter
Top Products
C6150 User’s Guide
99
USB Menu
Note: Factory default settings are shown in bold.
Network Menu
Note: Factory default settings are shown in bold.
Item Settings Explanation
SOFT RESET ENABLE
DISABLE
Enables or disables the SOFT RESET
command.
SPEED 480Mbps
12Mbps
Sets the maximum transfer speed
for the USB interface.
SERIAL
NUMBER
ENABLE
DISABLE
ENABLE allows your computer to
identify the printer by its USB
interface serial number.
Item Settings Explanation
TCP/IP ENABLE
DISABLE
Enables or disables this network
protocol.
NETBEUI ENABLE
DISABLE
Enables or disables this network
protocol.
IP ADDRESS
SET
AUTO
MANUAL
Change this to Manual to specify the IP
address through the front panel (see
next entry). Required for non-DHCP
networks.
IP ADDRESS xxx.xxx.xxx.xxx
Default =
198.168.100.100
Current assigned IP address. To
change:
•Press ENTER.
•Use
+/– keys to increment first
octet.
• Press ENTER to move on to the next
octet.
• Repeat for each octet.
•Press ENTER to register the new
address.
SUBNET MASK xxx.xxx.xxx.xxx
Default =
255.255.255.000
Current assigned subnet mask. To
change, proceed as above.
GATEWAY
ADDRESS
xxx.xxx.xxx.xxx
Default =
192.168.100.254
Current assigned gateway address. To
change, proceed as above.
Factory Default [EXECUTE] Initializes the network card.