Filter
Top Products
English
Chapter 3 - Macintosh Setup 43
Chapter 3 - Macintosh Setup
USB connection
Operating environment
• MacOS 8.5 or higher running on a Macintosh
computer with a USB interface.
• Do not disconnect the USB interface cable during
printing.
• Do not immediately disconnect and connect the
USB cable or vice versa. Wait at least 5 seconds
before re-connecting or disconnecting the cable.
• The operation of the printer is not assured if a
USB compatible device is connected
concurrently with other USB compatible
machines.
• When connecting multiple printers of the same
type, the Chooser displays *****1, *****2,
*****3, etc. These numbers depend on the order
of connecting or turning on each printer.
• If a USB hub is used, it is necessary to connect
the USB hub directly to the computer.
• If the memory setting for the print monitor is low
and depending on the document, background
printing may not be able to be carried out.
Increase the memory setting for the print monitor
to carry out background printing without
problems.
• Depending on the model of computer, updates to
the operating system may be needed, e.g. iMac
Update 1.0, iMac Update 1.1, iMac Firmware
Update, etc. For information on the latest updates
and installation, contact Apple Computers.
Connection
Note:
No USB interface cable is supplied with the
printer. Please use a USB interface cable that is
compatible with USB specification 1.1.
9000GBS.book Page 43 Wednesday, December 6, 2000 10:07 AM