Filter
Top Products
CX2032 MFP User’s Guide Maintenance
116
Transfer belt replacement
The belt unit is located under the four image drums. This unit requires
replacement approximately every 60,000 pages.
Switch off the MFP and allow the fuser to cool for about 10 minutes
before opening the cover.
1. Gently raise the scanner.
Scanner up.eps
2. Press the cover release (a) and open the MFP’s top cover (b)
fully.
Cover Release.eps
WARNING!
If the MFP has been powered on, the fuser will be hot.
This area is clearly labelled. Do not touch.
b
a