Filter
Top Products
CX2032 MFP User’s Guide Maintenance
121
2. Press the cover release (a) and open the MFP’s top cover (b)
fully.
Cover Release.eps
3. Identify the fuser handle (1) on the top of the fuser unit.
4. Pull the two fuser retaining levers (2) towards the front of the
printer so that they are fully upright. Fuser Unlock.eps
5. Holding the fuser by its handle (1), lift the fuser straight up and
out of the MFP. If the fuser is still warm, place it on a flat surface
which will not be damaged by heat.
6. Remove the new fuser from its packaging and remove the transit
material.
7. Holding the new fuser by its handle, make sure that it is the
correct way round. The retaining levers (2) should be fully
b
a
C
M
Y
K
2
1