Filter
Top Products
CX2032 MFP User’s Guide Maintenance
124
Clean the ADF
From time to time the pad assembly and feed rollers may become
contaminated with ink, toner particles or paper dust. In this case the
scan module may not feed documents smoothly. If this occurs, follow
the cleaning procedure below.
1. Moisten a cotton swab with isopropyl alcohol (95%).
2. Carefully pull open the ADF front cover.
ADF cover open.eps
3. Wipe the feed roller (1) by moving the swab from side to side.
Cleaning ADF1.eps
4. Rotate the roller forward with your finger and repeat step 3 until
the roller is clean. Be careful not to snag or damage the springs
near the pad (2).
5. Wipe the pad (2) from top to bottom, being careful not to hook
the springs.
6. Close the ADF front cover.
1
2