Filter
Top Products
CX2032 MFP User’s Guide Installing upgrades
129
as you push the unit into it. Push the unit all the way in until it
stops and latches home.
Duplex Install.eps
4. Switch the MFP on and wait for it to warm up (about 1 minute).
5. Print a menu map as follows:
Control menu_oda.jpg
(a) Press Menu (1) on the scanner control panel.
(b) Using the UP/DOWN arrow keys (2), navigate to the
Report Print menu and press OK (3) once for the menu
map.
(c) Press OK (3) again to print the menu map.
(d) When the menu map is printed, press Return (4) to exit the
menu system.
6. Examine the first page of the menu map.
Near the top of the page, between the two horizontal lines, you
will see the current MFP configuration. This list should indicate
that the duplex unit is now installed.
All that remains is to adjust the Windows printer driver to make
full use of the new features. See “Adjusting windows printer
drivers” on page 136.