Filter
Top Products
CX2032 MFP User’s Guide Installing upgrades
132
(c) Press OK (3) again to print the menu map.
(d) When the menu map is printed, press Return (4) to exit the
menu system.
11. Examine the first page of the menu map.
Near the top of the page, between the two horizontal lines, you
will see the current MFP configuration. This list contains the figure
for total memory size.
This should indicate the total memory now installed, which should
be the size of memory board you have installed plus 256MB.
Hard disk drive
The optional 40GB internal hard disk drive (HDD) enables collating of
printed pages and can be used to store overlays and macros, fonts, and
secure or proof documents waiting to be printed.
1. Switch the MFP off and disconnect the AC power cable.
2. Pull open the access panel on the side of the machine.
Side
cover open.eps
3. Locate the clip (1) on the top of the disk unit into the slot (2) in
the printer.
4. Plug the end of the connecting cable (3) into the disk unit
connector (4) in the printer.