Filter
Top Products
CX2032 MFP User’s Guide A guide to printing
172
Setting the driver device options
This section explains how to ensure that your printer driver can utilize
all of the hardware features installed in your MFP.
Accessories such as hard disk, duplex unit (two sided printing),
additional paper trays, etc., will only be usable if the printer driver on
your computer knows they are there.
In some cases the hardware configuration of your MFP is automatically
detected when the driver is installed. However, it is advisable to at least
check whether all of the available hardware features are listed in the
driver.
This procedure is essential if you subsequently add extra hardware
features to your MFP after the drivers have been installed and set up.
1. Access the driver’s [Properties] window. (See “Changing the
driver defaults” on page 170.)
2. Select the [Device Options] tab.
In the Windows XP PostScript driver the tab may be called “Device
Settings”.
3. Set the options for any devices you have installed, including the
correct number of paper trays, high capacity feeder, duplex unit,
etc.
4. Click [OK] to close the window and save your changes.