Filter
Top Products
CX2032 MFP User’s Guide A guide to printing
187
Step 1 - Gather or create the ICC profiles
Where can I get the profiles I need?
Step 2 - Down loading ICC profiles to the hard disk
The internal hard disk must be installed in the printer.
You can download profiles to the MFP hard disk using the Profile
Assistant utility.
1. Launch Profile Assistant
2. Select an MFP
If this is the first time you have used Profile Assistant, you should
allow the utility to search for compatible machines.
Select the connection type “Network (TCP/IP)”, and click Start to
begin searching.
If you know the MFP’s IP address, you can enter it manually.
3. The main screen of Profile Assistant displays the profiles resident
on the selected MFP’s hard disk. To download a new profile to the
MFP:
(a) Click Add.
(b) Select an ICC profile from your computer's hard disk.
(c) Once you have selected a profile, you can add it to the MFP
as one of the 4 profile types - RGB Source, CMYK
Simulation, Printer or Linked.
PROFILE
TYPE
WHERE TO GET PROFILES
RGB Source
(RGB Input)
Obtain your RGB source profiles from your scanner, camera
or monitor manufacturer.
CMYK
Simulation
(CMYK input)
Obtain the simulation profile from the manufacturer of the
printer you wish to simulate.
Printer
(CMYK Output)
The factory default profiles for your MFP are built-in. If you
need greater accuracy, you should create your own MFP
profile using third-party ICC profile creation software.
Link Profile You can create Link profiles using third-party ICC profile
creation software.
Note that not all ICC profile creation software can create
Link profiles.