Filter
Top Products
CX2032 MFP User’s Guide A guide to printing
192
To simulate the output of another printer, you need to download at least
2 profiles to your MFP using Profile Assistant:
> RGB Source Profile
> Simulation Target Profile
> Printer Output Profile (optional)
Once the profile(s) have been down loaded, make the appropriate
selections in the printer driver, as described below.
If you are using a source RGB document, simulate the output of another
printer by making the following selections in the printer driver:
1. On the printer driver [Color] tab, select [Graphic Pro] (1) and
click [Options].
RGB Simulation_oda.jpg
2. Select [Printer Simulation] (2).
3. Select the ICC profile that corresponds to the device used to
capture or display your source document - this could be a
monitor, scanner or digital camera (3).
4. Remember that the names “RGB Source 1”, “RGB Source 2” and
so on relate to the number assigned to the profile using Profile