Filter
Top Products
CX2032 MFP User’s Guide A guide to printing
201
Windows PCL
1. In the driver’s [Setup] tab, recall any saved [driver settings] you
may wish to use.
PCL Booklets_oda.jpg
2. Choose [Booklet] from the [Finishing Mode] drop-down list, then
click [Options].
3. In the Options window you can set the [signature] size, the
number of [pages] per side of paper and the [binding margin] if
your document is going to be thick. The graphic in this window
shows the effect of each choice you make.
NOTE
If the Booklet choice is not shown, check that the Duplex option is
enabled in the driver. (See “Setting the driver device options” on
page 172.)