Filter
Top Products
CX2032 MFP User’s Guide A guide to printing
208
PS Custom Page Edit.eps
3. In the PostScript Custom Page
Size Definition window, Choose
your [paper feed direction]
from the drop-down list.
The available choices are:
Notice that the size ranges available swap places when you
change the paper feed direction between a portrait and a
landscape choice.
Remember that the width of the multipurpose tray is limited to the
long edge of an A4 sheet 11.7 inches (297mm), so, if your paper
is longer than this, you will have to feed it short edge first.
4. You can also position the page image on the paper to avoid
printing too close to the edge by choosing an [Offset].
Offset relative to [perpendicular] direction adds to your left
margin.
Offset relative to [parallel] direction adds to your top margin
(normal feed) or bottom margin (flipped feed).
5. Click [OK] to close the PostScript Custom Page Size Definition
window.
6. Click [OK] to close the Advanced Options window.
7. In the driver’s window, choose the [Multipurpose Tray] as the
[Paper Source].
Short edge first The page is portrait (tall) format and you will feed
the top of the page into the MFP.
Long edge first The page is landscape (wide) format and you will
feed the top of the page into the MFP.
Short edge first
flipped
The page is portrait (tall) format and you will feed
the bottom of the page into the MFP.
Long edge first
flipped
The page is landscape (wide) format and you will
feed the bottom of the page into the MFP.