Filter
Top Products
CX2032 MFP User’s Guide A guide to printing
210
Duplex (double-sided) printing
If your MFP has a duplex unit installed you can print on both sides of the
paper, to save paper, weight, bulk and cost.
> Only paper can be used for duplex printing, not transparencies or
other media.
> Use paper stock of 20-32 lb. (75–120 g/m²). If you experience
excessive curling with 20-24 lb. (75–90 g/m²) paper, use 28 lb.
(105 g/m²).
> Use standard sized paper stock only, e.g. A4, A3, Letter, etc.
> Load the paper print side up. Ream wrappers are usually marked
with an arrow, indicating which is the print side.
> Paper can be fed from standard paper trays, including the high
capacity feeder if you have one, but not from the multipurpose tray.
> Do not set the paper weight to Ultra Heavy.
> Do not enable the White Page Skip function.
Windows PostScript
1. In the driver’s Layout tab, under [2-Sided Printing], select the
binding edge you want.
PS Duplex_oda.jpg
For portrait (tall) page layout the usual choice is [Long Edge]. For
landscape (wide) page layout the usual choice is [Short Edge].
Choosing [Off] turns off duplex printing and your document will be
printed single-sided.