Filter
Top Products
CX2032 MFP User’s Guide Configuring your machine
28
Network set up
The MFP must also be set up properly on your network to perform scan
to e-mail and scan to FTP functions. In order for other network devices
to find the MFP on the network, the following network parameters have
to be set.
1. DHCP enable:
2. IP Address: . . .
3. Subnet mask:. . .
4. Gateway IP:. . .
5. DNS server:. . .
6. SMTP server:. . .
7. SMTP port:25
8. POP3 server: . . .
9. POP3 Port:110
Explanation:
1. DHCP Enable:
Choose Yes to obtain IP/subnet/gateway addresses automatically
from DHCP server. After changing setting from Disable to Enable,
switch scanner module power OFF then ON.
2. IP Address:
The Internet Protocol (IP) address assigned to your machine by
your network administrator.
3. Subnet Mask:
The net mask address assigned by your network administrator.
4. Gateway IP:
The gateway IP address assigned by your network administrator.