Filter
Top Products
CX2032 MFP User’s Guide Print settings and security
68
tray), Tray 2 (if you have the optional 2nd paper tray installed) or
the multi purpose feeder. You can also click on the appropriate
part of the screen graphic to select your preferred tray.
2. The setting for paper weight should match the type of paper on
which you intend to print.
3. A variety of document finishing options can be selected, such as
normal one page per sheet, or N-up (where N can be any number
up to 16) for printing scaled down pages at more than one page
per sheet. Booklet printing prints two pages per sheet on each
side of the paper so that when folded they make up a booklet.
Booklet printing requires the duplex unit to be installed in your
MFP.
Poster printing will print large pages as tiles spread over multiple
sheets.
4. For two-sided printing, you can choose to flip the page by the
long edge or the short edge. Of course, this requires that a
duplex unit be installed in your MFP.
5. If you have changed some printing preferences before and saved
them as a set, you can recall them to avoid having to set them
individually each time you need them.
6. A single on-screen button restores the default settings.
Store to hard disk/Job Spooling
This feature allows print jobs to be created on the PC and stored on the
MFP’s hard disk for printing on demand. This is good for forms, generic
memos, letterhead, stationery, etc.
If you use this feature for standard forms, for example, you can walk up
to the MFP at any time and print off your forms without having to re-
send them from the PC.
The document is not automatically deleted from the MFP’s hard disk
after printing. It remains there for future use until you delete it from the
printer control panel or from your PC with the Storage Device Manager
utility.
NOTE
If this choice does not appear in the driver screens, or if it is
grayed out, check to ensure that the hard disk is enabled in the
printer driver. (See “Adjusting windows printer drivers” on
page 136.)