Filter
Top Products
OVERLAYS AND MACROS > 159
9.
Choose
Projects
→
Save
Project
and enter a meaningful name
(e.g. “Letter Stationery”) so that you can recognise it later if
you want to modify it.
10.
Choose
Projects
→
Send Project Files to Printer
to download
the project to the printer.
If you have a hard disk in the printer, SDM will automatically
download files to it. If not, SDM will download files to flash
memory. If you have a hard disk but still prefer to download to
flash memory, double-click the file name in the Project window
and under
Volume
, type in
%Flash0%
and then click
OK
.
11.
When the message “Command Issued” appears confirming
that the download is complete, click
OK
to clear the message.
TEST PRINTING THE OVERLAY
1.
Click on the printer icon for the relevant printer and choose
Printers
→
Test Form
.
2.
In the Test PostScript Form window, to test each overlay select
it and click
OK
. There will be a short pause while the printer
processes the form, and then it will print.
3.
When each overlay has been tested, click
Exit
.
4.
Click the standard Windows
Close (X)
button, or choose
Projects
→
Exit
to close Storage Device Manager.
DEFINING OVERLAYS
This is the final step before the new overlays are ready for use.
1.
Open the Printers (called “Printers and Faxes” in Windows XP)
window via the
Start
menu or the Windows Control Panel.
2.
Right-click on the Relevant PostScript printer icon and choose
Printing Preferences
from the pop-up menu.
3.
On the
Overlay
tab, click the
New
button.