Filter
Top Products
INSTALLING UPGRADES > 186
6.
Carefully remove the new memory board from its wrapping. Try
to handle the board only by its short edges, avoiding contact
with any metal parts as far as possible. In particular, avoid
touching the edge connector.
7.
Notice that the memory board has a small cutout in the edge
connector, which is closer to one end than the other.
8.
Identify the RAM expansion slot (1) in the printer.
9.
If the RAM expansion slot already contains a memory upgrade
board, that board will have to be removed before you can
install the new one. To remove it proceed as follows, otherwise
skip to step 10.
(a)
Identify the locking clips (2) at each end of the RAM
expansion slot (1).
(b)
Push the clips outward and back into the printer. The
board will pop out slightly.
(c)
Grip the board firmly by its short edges and pull it out of
the slot.
(d)
Place the removed memory board in the antistatic bag
which originally contained the new memory board.
1 2
3
4
2