Filter
Top Products
|
Developer’s Guide: English 127
7.1.2.2 Using Paper Size that is 187.96 mm (7.4") or more and less than 215.9 mm (8.5") in width
Custom Size is variable in width in the range of 187.96 mm (7.4") - 215.9 mm (8.5"), but when the designated width is more
than 187.96 mm (7.4"), you must take the following points into consideration when creating print data.
The printer’s physical printable area is 160.02 mm (6.3").
The value that is set at Left Margin/Page Setup in the application is treated as the distance from the printer’s print start
position (left edge). In other words, if the value set at Left Margin is greater than 0, the printing area shifts to the right in
actual printing by as much as the set value. Therefore, you need to adjust the printing position appropriately by setting the
left margin at 0 so that the right edge of the data you want to print does not go beyond the printable area, and also by
setting ample distance for the right margin.
O425_114.jpg
1 Minimum left margin
2 Paper Size 187.96mm (7.4 inch)
3 Right Margin 27.94mm (1.1 inch) or more
4 Left margin displayed in application
5 Printable Maximum Width 160.02mm (6.3 inch)
6 Slip Tray Left Side
7 The left margin is reflected in relation to the print start position; thus, the print start position shifts.
8 Slip Tray Right Side
9 Print Start position
10 Paper Guide