Omega Engineering OME-PIO-D96 Computer Hardware User Manual


 
2.6.7 OME-DB-24PR/24POR/24C
OME-DB-24PR 24*power relay, 5A/250V
OME-DB-24POR 24*Photo MOS relay, 0.1A/350VAC
OME-DB-24C 24*open collector, 100mA per channel, 30V max.
The OME-DB-24PR, 24 channel power relay output board, consists of 8 form C
and 16 form A electromechanical relays for efficient switching of load by
programmed control. The contact of each relay can control a 5A load at
250VAC/30VDC. The relay is energized by applying a 5 volt signal to the appropriate
relay channel on the 20-pin flat cable connector (only 16 relays) or 50-pin flat cable
connector(compatible for OME-DIO-24 series). Twenty-four enunciator LEDs, one
for each relay, light when their associated relay is activated. To avoid overloading
your PCs power supply, this board needs a +12VDC or +24VDC external power
supply.
OME-DB-24PR
OME-PIO-D96
50Pin cable
Normal Open
Com.
Form A Relay
To 50pin connector
CN2 ~ CN4=D/O
Note:
50-Pin connector for OME-DIO-24, OME-DIO-48, OME-DIO-144,
OME-PCI-D144, OME-PIO-D144, OME-PIO-D96, OME-PIO-D56, OME-PIO-D48,
OME-PIO-D24
20-Pin connector for 16 channel digital output, OME-A-82X, OME-A-62X, OME-DIO-
64, OME-ISO-DA16/DA8
Channel : 16 Form A Rela
y
, 8 Form C Rela
y
OME-PIO-D96 User Manual (Ver.1.1, Mar/2003) ---- 20