OPTI-UPS DS3000EL Power Supply User Manual


 
Specifications
Features
* Online Working Mode: All changeable structures, high output stability rate, zero out-off time.
* Intelligent RS232 Communications Functions: To supervise and control the conditions of power supply and UPS
through OPTI-UPS powersoft power supply supervision and control software. Also supporting OPTI-UPS SNMP network
adapting apparatus to enhance the reliability of the system.
* High Input Power Factor: The advanced PFC control technology to ensure input power factor larger than 0.95 when the
output is full-loaded, so as to reduce the load on the power network.
* Minimized Size: To enhance reliability of operation and reduce costs for the user.
* High Efficiency and Low Wearing: Efficiency higher by 10%, less energy consumption, lesser noise and longer usage life.
* Full-range of Protection Functions: Provision of super-high output voltage protection, low battery protection, trio
super-high current protection and super-high input voltage protection, to enhance the adaptability to utility power supply
and impact proof and ensure the safe operation of the user’s equipment and the UPS.
* Three-Classes Over-Current Protection
* Input Over-Voltage Protection
* DS1000E / DS1000EL /
DS2000E / DS2000EL /
DS3000E / DS3000EL /
DS6000E / DS6000EL
DS1000E / DS2000E / DS3000E / DS6000E
DS1000EL / DS2000EL / DS3000EL / DS6000EL
High-Frequency Online UPS
Line Interactive
UPS Series
On Line UPS
Series
AVR Series
Inverter Series
Surge Series
Standby UPS
Series
Networking
Series
Green Power
Series
MODEL NAME DS1000E DS2000E DS3000E DS6000E DS1000EL DS2000EL DS3000EL DS6000EL
INPUT
AC voltage range
Input Frequency range
Number of phases
Battery voltage (Vdc)
160 ~ 275 Vac
OUTPUT
Power
Voltage
Frequency
Wave form
Switching Time
OTHER FEATURES
Charge recovery time
Panel display
Warning functions
50 +/-5 % Hz
36
1000VA
Sockets Sockets and Terminal Terminal
72
2000VA
96
3000VA
120
6000VA
Three lines in single phase
230 +/-2% V
50 +/-0.2% Hz (battery mode) 50 +/-0.1% Hz (battery mode)
105%~125% Load, lasting 60
seconds. 125%~150% Load,
lasting 30 seconds.≥150% lasting
300 milliseconds
Sine wave THD < 3% (Linear load)
105%~130% Load, lasting 60 seconds.
135%~150% Load, lasting 30 seconds.
≥150% lasting 300 milliseconds
LED displays operation status of UPS
< 45 < 55
LED displays operation status and
LCD displays parameter of UPS
0~95% No condensation
490 x 198 x 347465 x 155 x 225
637 x 253 x 680 637 x 253 x 500
0 ms
RS232 interface supports UPS power management software and SNMP protocol
<12 hours (Standard time delay model)
0 - 40 C
Battery low voltage protection, overload protection, short-circuit protection and excess temperature protection
Battery low voltage, abnormal power supply, UPS malfunction
3694.5183817328.515
Output mode
Communications interface
Protection function
Noise (dB)
Working temperature
Relative humidity
Dimensions (L x W x H) (mm)
Weight (kg)
Overload capacity
41-1.