EN
16
If the AC / DC adaptor is plugged, press the
PROJECTOR ON and the projector will stay
continuously on. Press the PROJECTOR ON button
again to deactivate the continuous projection-on function.
ANIMATION SPEED SETTING
To enter to the projector setting mode:
1. Press the PROJECTOR ON button for 2 seconds.
2. Use the UP and DOWN buttons to select either fast
or slow animation.
3. Press the PROJECTION ON button to confirm.
NOTE
THE PROJECTOR FUNCTION
ACTIVATING THE PROJECTOR
To turn on the projector:
1. Press the SNOOZE button to activate the projector
for 5 seconds.
The order of the Flashing items is speed
high / slow, alarm animation on / off, exit project setting
mode.
NOTE
RM818P English R7 7/14/04, 3:58 PM16