Filter
Top Products
9-17
9.2.5. Setting the Display Unit
1. Fix the Display Unit using the 4 Screws <N9>
(No1 to No4).
2. Fix the Display Unit using the 2 Screws <N10>
(No1 to No2).
Note:
Tighten the Screws in the numbered order (No1 to No4).
Tighten the Screws in the numbered order (No1 to No2).
Screws <N9>: DRYN4+J10FKL
Screws <N10>: DXSB4+15FNLB
<N9>
<N9>
<N9>
<N9>
Display Unit
<N10>
<N10>
No.1
No.2
No.3
No.4
No.1
No.2
㪘
LCD CABLE GUIDE Set
SEC A-A
The moran must come over
the upper horizontal part of the rib.
The Cables should not
be overlapped.
LCD CABLE GUIDE
Arranging position
(See the left picture.)
A
Insert the LCD Cable into the
holding hole of the LCD Cable clamp.
Put LCD CABLE GUIDE on
the concave area of the top
Cabinet after attaching the Cables.
(The Cables are omitted in the picture below.)