Filter
Top Products
3
Pressing this key combination adjusts the bright-
ness of LCD. The brightness setting is stored in
memory separately under the condition the AC
adaptor is connected and under the condition the
AC adaptor is not connected.
By pressing this key combination, you can select
either an external display, LCD or simultaneous.
( page 31)
Pressing this key combination turns on/off audio
from the internal speakers and headphone jack.
Rebooting the computer, or powering off then on,
restores the speaker setting of the Setup Utility.
Pressing this key combination adjusts the volume
of the internal speakers and headphone jack.
Pressing this key combination causes the current
screen on the display to be saved to memory, and
powers off the computer. ( page 7)
Pressing this key combination displays the remain-
ing battery capacity on the screen. ( page 18)
Pressing this key combination causes the current
screen on the display to be saved to the hard disk,
and powers off the computer. ( page 7)
LCD brightness con-
trol ( down)
LCD brightness con-
trol ( up)
Display change
Speakers on/off switch
Volume control
( down)
Volume control ( up)
Power off using the
standby function
Remaining capacity of
the battery pack
Power off using the hi-
bernation function
Key
Key Combinations
Fn + F2
Fn + F3
Fn + F4
Fn + F5
Fn + F7
Fn + F6
Functions Popup Window
ON
OFF
Down
Up
Fn + F9
Fn + F
10
Remaining
capacity (%)
display
Battery pack is
not installed.
Do not press the following key combinations repeatedly in (quick) succession.
Do not press the following key combinations while using the touch pad (mouse) or other keys.
CAUTION
NOTE
CAUTION
Disabling the speakers will also disable the
warning beep.
This key combination cannot be used to adjust
the volume of the warning beep.
Fn + F1
* When [Disable] is set for [Fn+F7/Fn+F10 Key] with the Setup Utility, these key combinations become inoperable.
*
*
NOTE
Windows XP
When switching to a different user with the Fast User Switching function, these key operations may not work. If this
is the case, log off, then log on again and try the operation once more.