Filter
Top Products
Error Message
Follow the instructions below when an error message appears. If the problem persists or if the error
message is not shown here, contact Panasonic Technical Support.
Error Message Solution
Bad System CMOS An error has occurred in the memory of system settings. This occurs
when the memory content is changed by an unexpected program
operation, etc.
Start the Setup Utility and return the settings to the default values,
and then change the settings as necessary.
If the problem persists, the internal clock battery may need to be
replaced. Contact Panasonic Technical Support.
System CMOS Checksum
Error
Invalid Year. System date
restored to 01/01/20XX
The date and time settings are not correct.
Start the Setup Utility and set the correct date and time.
If the problem persists, the internal clock battery may need to be
replaced. Contact Panasonic Technical Support.
Press <F2> to enter setup
Write down the error details and press «F2» or «Del» to start the
Setup Utility. Change the settings if necessary.
Pa
g
e 1 of 1Error Messa
g
e
2011-11-29file://X:\MÀJ Site Web GouvQc\Novembre 2011 A
j
out de Panasonic\Guides d'usa
g
er\C
...