Filter
Top Products
7. Fax
42
7.6 Receiving a fax manually –
Auto answer OFF
7.6.1 Activating TEL mode
Press {Auto Answer} repeatedly to display “TEL
MODE”.
L The {Auto Answer} light turns OFF.
Note:
L If you do not answer the call within 10 rings, the unit
will temporarily switch to fax reception. The other
party can then send a fax.
How to receive phone calls and faxes
1. Lift the handset to answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {Start}.
3. Replace the handset.
Note:
L To stop receiving, see page 62.
How to receive faxes with an extension telephone
If you have another telephone connected to the [EXT]
jack or the same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the handset
of the extension telephone.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*} {#} {9} (default fax activation code)
firmly.
3. Replace the handset.
Note:
L To stop receiving, see page 62.
L To receive fax documents using the extension
telephone, make sure remote fax activation is turned
ON (feature #434 on page 54) beforehand. The
default setting is ON.
{Start}