Filter
Top Products
Customizing Your Machine
192
Fax Parameter Table
044 Password-Receive *Off Setting a 4-digit RCV-Password and selecting whether the machine
performs and checks the RCV-Password of the transmitting station
when receiving. (See page 79)
On
046 Select Receive *Invalid Selecting whether the machine performs selective reception.
(See page 92)
Valid
052 Diagnostic Password (----) Setting the password for Remote Diagnostic Mode. Please ask your
Panasonic Authorized Dealer for details.
053 Sub Address Password (----) Setting a 20-digit password for secured sub-address communication.
054 Fax Forward *Invalid Selecting whether the machine performs Fax Forwarding to the
specified destination.
Valid
056 Cover Sheet *Off Setting the home position of the Cover Sheet parameter in the Select
Mode. (See page 73)
On
077 Department Code *Invalid Selecting whether the machine performs the Department Code
operation. (See page 94)
Valid
078 Rotation XMT Invalid Selecting whether the machine performs rotation transmission.
*Valid
082 Quick Memory XMT Invalid Selecting whether the machine performs Quick Memory Transmission.
Invalid :Stores all documents into memory first before dialing the
telephone number.
Valid :Starts dialing the telephone number immediately after storing
the first page.
*Valid
086 RINGER VOLUME Off Setting the home position of the ringer volume when your machine
receives a call.
* Soft
Loud
089 List Output Tray *Upper Selecting the Output Tray home position for List printout.
Upper :The List printout exits to the Upper Output Tray.
Bottom :The List printout exits to the Bottom Output Tray.
(DP-2310/3010 : "Inner 1", "Inner 2", "Outer")
Bottom
095 Duplex Print *Invalid Selecting whether the machine performs duplex print when Letter/A4
originals are received.
Valid
097 Special Tray
No.1 - 4
(DP-2310/3010: No.1 - 3)
*None Select up to 4 Special Trays that will not be used for printing received
faxes (4-Trays, plus LCT configuration). One Tray must always be
available for receiving Faxes.
(You can specify one Tray (1 ~ 4, LCT) for each selection No. 1, No. 2,
No 3 and/or No. 4)
(DP-2310/3010: 4-Trays only)
Tray 1
Tray 2
Tray 3
Tray 4
LCT
099 Memory Size
(Flash Memory)
- Displays the amount of base and optional memory installed.
(Base Memory + Optional Memory)
* = Factory default setting
No. Parameter Setting Comments