Filter
Top Products
17
FP-X series
FP-X add-on cassette
FP-X options and service parts
Product number list
FP-X Input /Output cassette
FP-X Input cassette
FP-X Output cassette
FP-X Pulse I/O cassette
FP-X Analog input cassette
FP-X Analog output cassette
FP-X Analog I/O cassette
FP-X Thermocouple input cassette
FP-X Master memory cassette
with a real-time clock
FP-X COM1 Communication cassette
FP-X COM2 Communication cassette
FP-X COM3 Communication cassette
FP-X COM4 Communication cassette
FP-X COM5 Communication cassette
FP-X COM6 Communication cassette
4-point input of 24VDC, bi-directional (sink/source), 3-point output of NPN transistor 0.3 A/24VDC
8-point input of 24VDC, bi-directional (sink/source)
8-point output of NPN transistor, 0.3A/24VDC
6-point output of PNP transistor, 0.5A/24VDC
High-speed counter input: single-phase 2ch., each 80kHz or two-phase 1ch., 30kHz, Pulse output: one axis 100kHz/ch.
(Use restriction is applied for a two-unit installation)
Cannot be used with a transistor output type control unit.
2-point analog input, 0 to 10V/0 to 20mA, 12-bit, 2ms/2ch. (non-insulated)
2-point analog output, 0 to 10V/0 to 20mA, 12-bit, 2ms/2ch. (insulated)
2-point analog input, 0 to 5V/0 to 10V or 0 to 20m, 12-bit, 2ms/2ch., 1 point analog output, 0 to 10V or 0 to 20m, 12-bit, 1ms/1ch. (insulated)
2-point thermocouple input, K/J type, Resolution: 0.2°C, 200ms/2ch. Channels insulated
Master memory: Capable of storing all program steps and comments simultaneously. Storage of FPWIN Pro source files
Real-time clock: Year, month, day, hour, minute, second, day of week (optional battery required)
RS232C 1ch. RS and CS control signal equipped (non-insulated)
RS232C 2ch. (non-insulated)
RS485/RS422 selectable 1ch (insulated)
RS485 1ch. (insulated) + RS232C 1ch. (non-insulated)
Ethernet 1ch. (10BASE-T, 100BASE-TX) + RS232C 1ch. (non-insulated)
RS485 2ch. (insulated)
AFPX-IN4T3
AFPX-IN8
AFPX-TR8
AFPX-TR6P
AFPX-PLS
AFPX-AD2
AFPX-DA2
AFPX-A21
AFPX-TC2
AFPX-MRTC
AFPX-COM1
AFPX-COM2
AFPX-COM3
AFPX-COM4
AFPX-COM5
AFPX-COM6
Product name Product numberSpecifications
FP-X Backup battery
FP-X Terminal block
Battery for backing up the operation memory and real-time clock
Expansion unit connection cable, 8cm
Expansion unit connection cable, 30cm
Expansion unit connection cable, 80cm
Terminal block for C30, C60 and E30, 21 pins, cover with no marking, four units included
AFPX-BATT
AFPX-EC08
AFPX-EC30
AFPX-EC80
AFPX-TAN1
Product name Product numberSpecifications
FP-X Expansion cable
RS232C Programming cable
USB Programming cable
Programming cable for FP series PLCs, Mini DIN 5-pin male to sub-D 9-pin, 3m AFC8513
AFPXCABUSB2FPX programming cable, USBA to USBB, 2m
01/2008