Filter
Top Products
8 9
Simple connection and maintenance
Great diversity and variety of use
GT21C
Communications
Power supply
Allows simultaneous
debugging of GT
and PLC.
Screen data
transmission/ PLC
debugging
Rear of GT21C
Conventionally, screens were created for each language. With this new
language switching function, data can be entered in all available languages
for each part. The same screens can be created all at once, and ladder
diagram creation is also easier. The character table (below picture) for
switching the language display can be edited in Excel and imported.
FP0FP∑FP-X
Hairline silver
Pure black
If your operating system is Windows 2000 or XP, the above languages can be
displayed on one screen at a time. With other operating systems, the screen
creation tool “Terminal GTWIN English Version” is required, and the operating
system’s language must be the one you want to display.
Japanese
Simplified
Chinese
Traditional
Chinese
Korean Turkish
English German French Spanish
Italian
■Available languages
The new 3D-design buttons
provide higher visibility and
operability.
4
mm
Move in
increments
of one dot
The 5-inch STN 256-color touch panel displays clear and beautiful images.
Programmable Display
32 chars.
×24 lines
320×240
dots
Through
function
24V DC
RS232C/
RS422
(RS485)
STN
256 colors
White LED
backlight
5-inch
color
Free switch
layout
(8×8 dots min.)
7mm
*1
33.9mm
29.9
mm
112 mm
142 mm
Beautiful
■
Cool and sophisticated body design
■
Beautiful images, Top quality images in small-sized panels
Simple
■
High operability achieved by the customizable
screen layout
5-inch
STN
256 colors
QVGA
The image quality is
equivalent to the
6-inch type display,
which it can replace.
• The cool design fits a variety of installation locations without spoiling the design of the target
equipment.
• The projection from the target equipment surface is as low as 4 mm, allowing for a beautiful
finish.
• The total depth is the industry’s lowest at 29.9 mm (excluding the projection).
• The analog-touch design
allows you to freely adjust the
screen layout in increments of
one dot. You can also freely
choose
• TrueType font character sizes
and arrangement
Useful
■
Maintenance-free white LED backlight
• The use of the white LED backlight eliminated backlight
replacement work.
■
Environmentally friendly lower power
consumption design
• Lower power consumption of 4.8 W or less: Approx. 50% of our
conventional model (GT30)
■
The through function improves the convenience in
combination with our FP series PLC.
■
The 5-inch screen provides a wide variety of display functions that improve the workability for operators.
■
The language switching function facilitates PLC
programming and screen switching.
■
The high environmental resistance is
IP65-rated.
■
An original screen can be displayed for
a specified period of time after startup.
Simultaneous operation of GT
data transfer and PLC
debugging will be available by
connecting your GT to a
personal computer and our FP
series PLC.
“TrueType fonts”
With the TrueType fonts, the screen
can display up to 768 characters at
a time (32 chars. x 24 lines) and
therefore be used effectively.
“Analog-touch design”
You can freely position switches
as small as 8 x 8 dots.
“Graph function”
You can identify the production or
operation status in line or bar
graph form.
“Flow Display function”
A flowing message of up to 64
characters (two-byte) can be
displayed at the bottom of the
screen. (128 messages)
“Alarm list”
Alarm activation, check, and
recovery can be recorded and
displayed.
“Write Device function”
This function writes the PLC values
or turns bits on/off according to the
PLC status or the screen No.
“Recipe function”
Settings by product item and other
data (up to 3,600 words) can be
transferred to PLC, simplifying PLC
programming.
*1: Note that the COM port connector projects 7 mm. Also take the cable diameter into account.
• The panel face protection sheet for GT21C is available as an option.
• To use the internal clock function, buy a commercially available battery (CR2032).
■
There are two types of communication [RS232C/
RS422 (RS485)]. Connection with PLCs of a
variety of manufacturers is possible.
(Please refer to the compatible PLC list.)
The 24-V RS422 type can be connected at a maximum distance of 500m.
FP2/FP2SH