Filter
Top Products
44
Cleaning the Unit
∫∫
∫∫
Outside of the scanner
Clean the unit at least once a month.
1
Turn the power off.
2
Clean the cover with a soft cloth.
•
The ADF insertion and exit slots get dirty
easily, therefore, proper cleaning is
required.
3
Remove dirt and dust from the fan
exhaust vent with a brush.
∫∫
∫∫
Inside the scanner
Clean the unit described below at least once a week or when 50,000 sheets have been scanned, whichever
comes first.
• Clean the rollers, all document sensors, double feed detection sensors and paper detection sensor if paper
jamming or double feeding occurs frequently.
• Clean the scanning section glass, CIS glass, sensor plate and sensor roller when black or white lines appear on
the scanned images. NOTE : There is no CIS glass and no sensor roller for the KV-S6050W / KV-S6050WU.
• If the documents that will be scanned are dirty, then the scanner parts may become dirty as well.
To maintain proper scanning, clean the scanner parts frequently.
• When scanning with the flatbed and black dots or white patches occur, open the document cover, and clean the
document glass and cover sheet (black sheet) using the accessory roller cleaning paper.
∫∫
∫∫
Cleaning the rollers
1
Turn the power off.
2
Using your hand, pull the ADF door
release towards you, then open the
ADF door completely.
ADF door
ADF door release
ADF door
ADF door release
(Inside the ADF door.)
≤ : Off position
Power switch