Panasonic KV-SL1055 Scanner User Manual


 
Preparing Documents
Notice
Make sure to remove paper clips and staples from documents before scanning. Failing to do so can
damage the unit, document, or both.
It is recommended to confirm that documents and cards are suitable for scanning (paper size,
thickness, type, etc.) before scanning them.
Before feeding, ensure that the document is not creased or folded. If the document is creased or folded,
a paper jam or damage to the document may occur.
When scanning important documents, confirm that the number of scanned images matches the number
of pages in the feed tray. Also, check the condition of the scanned documents.
Remove documents from the exit tray after they have been scanned.
Compatible Paper Types
Paper size:
Width
Length
The compatible paper sizes for this unit are as follows.
Width 48 – 216 mm (1.9 – 8.5 in.)
Length
When feeding one sheet: 54 mm – unlimited (2.1 in. – unlimited)
*1
When feeding multiple sheets: 54 – 356 mm (2.1 – 14 in.)
*1
Using "Long Paper", you can scan long documents by splitting them into smaller parts. For details about "Long Paper", refer to the
Image Capture Plus, TWAIN, or ISIS help.
Paper thickness:
0.04 – 0.5 mm (1.6 – 19.7 mils)
Note: 1 mil = 0.001 in.
Paper weight:
20 – 413 g/m² (5 – 110 lb.)
Operating Manual 23
O
p
e
r
a
t
i
o
n
Operation