Filter
Top Products
Push scan using the 7-segment LED
If you are using a KV-SL1066, KV-SL1056, KV-SL1055, KV-SL1036 or KV-SL1035 with Image Capture Plus,
you can perform a push scan using the 7-segment LED. A registered job number is displayed on the 7-segment
LED. Use the cursor button (A) to select a job number.
Note
• Register jobs in advance. For details about registering jobs, refer to the Image Capture Plus help.
1 2
1. Place the documents on the feed tray.
2. Use or of the cursor button (A) to select a job number.
3. Press the Start/Stop button (B).
• Scanning will start.
44 Operating Manual
Operation