Filter
Top Products
8. Programmable Features
49
Setting the auto
disconnection
{#}{4}{9} To answer a call with an extension telephone in TEL/FAX mode
(page 34) or TAM/FAX mode (page 35), activate this feature and
program the code.
{0} “OFF”
{1} “ON” (default)
1. {MENU} i {#}{4}{9}
2. Press {1} to select “ON”. i {SET}
3. Enter your code from 2 to 4 digits, using 0-9 and {*}.
L The default code is “;0”.
4. {SET} i {MENU}
Changing the greeting
message time for
TAM/FAX
{#}{5}{4}{1} “16s” (default): Maximum greeting message time is 16
seconds.
{2} “60s”: Maximum greeting message time is 60 seconds.
See page 40 for details.
Setting the scan
contrast
{#}{5}{8} To send or copy a document with faint or dark writing, set this
feature before transmission or copying.
{1} “NORMAL” (default): Used for normal writing.
{2} “LIGHT”: Used for dark writing.
{3} “DARKER”: Used for faint writing.
Copying phonebook
data from the base unit
to the cordless handset
{#}{5}{9}{1} “1 ITEM” (default)
{2} “ALL ITEMS”
See page 57 for details.
Screening the incoming
call
*1
{#}{6}{7} To hear an incoming call from the speaker when the answering
machine is recording the message.
{0} “OFF”
{1} “ON” (default)
Note:
L You can also program this feature with the cordless handset
(page 43).
Setting the Error
Correction Mode (ECM)
{#}{6}{8} This feature is available when the transmitting/receiving fax
machines are ECM compatible.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): If there is an error during fax
transmission/reception, the fax machine will support the
communication.
Note:
L You cannot change the setting when received documents are
in memory.
Feature Feature code Selection
FC228HK-PFQX2656ZA-en.book Page 49 Thursday, August 31, 2006 11:35 AM