Filter
Top Products
11. Help
69
11.3.9 If a power failure occurs
L The unit will not function.
L The unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
L Fax transmission and reception will be interrupted.
L If delayed transmission (feature #25 on page 47) is programmed and a power failure prevents the document from
being sent at the set time, the document will be sent after power is restored.
L If any fax documents are stored in the memory, they will be lost. When power is restored, a power down report will
be printed stating which documents in memory have been erased.
“This message contains
unrecognized
characters.” is displayed.
L You have received a message which contains Chinese characters. Ask the
sender to write the message using non-Chinese characters.
“FD” is displayed. L The unit could not connect to the SMS message centre. Confirm that the
correct SMS message centre numbers are stored (page 25). Confirm that
SMS is turned ON (page 25).
“FE” is displayed. L An error occurred while sending the message. Try again.
“,” is not displayed after you
display a message. An error
code is displayed.
L When an error code (“FD” or “FE”) is displayed, “,” will not be displayed
even if you have displayed the message.
Problem Cause & Solution
FC228HK-PFQX2656ZA-en.book Page 69 Thursday, August 31, 2006 11:35 AM