Filter
Top Products
4. Fax
35
4.7 Receiving a fax
automatically – Auto
answer ON
4.7.1 Activating FAX ONLY mode
Set the fax machine to FAX ONLY mode by
pressing {AUTO ANSWER} repeatedly to
display the following.
FAX ONLY MODE
L The {AUTO ANSWER} light is ON.
How faxes are received
When receiving calls, the unit will automatically
answer all calls and only receive fax documents.
Note:
L The number of rings before a call is answered
in FAX ONLY mode can be changed (feature
#06 on page 42).
4.8 Using the unit with an
answering machine
4.8.1 Setting up the fax machine
and an answering machine
1 Connect the answering machine.
L Remove the stopper (1).
2 Set the number of rings on the answering
machine to less than 4.
L This will allow the answering machine to
answer the call first.
3 Record a greeting message on the
answering machine.
L We recommend you record a message
up to 10 seconds long, and not to pause
for more than 4 seconds during the
message. Otherwise, both machines will
not function correctly.
4 Activate the answering machine.
5 Set the fax machine to the desired receiving
mode (page 34, 35).
L If you set to FAX ONLY mode, change
the ring setting in FAX ONLY mode to
more than 4 (feature #06 on page 42).
6 Check all or part of the followings are not the
same:
– the remote access code of the answering
machine
– the fax activation code (feature #41 on
page 43)
Answering machine
(Not included)
1
FL611AL-PFQX2169ZA-en.book Page 35 Thursday, February 24, 2005 11:37 AM