Filter
Top Products
7. Programmable Features
42
7.2 Basic features
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 19 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 20 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 21 for details.
Code #04: Printing a sending report
SENDING REPORT
=ERROR [±]
To print a sending report for fax transmission
results (page 30).
“ERROR” (default): A sending report will be
printed only when fax transmission fails.
“ON”: A sending report will be printed after every
transmission.
“OFF”: Sending reports will not be printed.
Code #06: Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=2 [±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “2” (default), “3”, “4”, “5”, “6”,
“7”, “8” or “9”. If you are using the unit with an
answering machine, set to more than 4 (page
35).
Code #12: Enabling remote operation for an
answering machine
REMOTE TAM ACT.
=OFF [±]
If you are using the unit with an answering
machine, activate this feature, and program the
remote activation ID. You can access the
answering machine remotely by pressing this ID
to retrieve recorded voice messages.
1. Press {MENU}.
2. Press {#} then {1}{2}.
3. Press {A} or {B} repeatedly to select “ON”.
4. Press {SET}.
5. Enter your ID from 1 to 5 digits, using 0–9,
{*} and {#}.
L The default ID is “11”.
6. Press {SET}.
7. Press {MENU}.
Code #13: Setting the dialling mode
(For Australian users only)
DIALLING MODE
=TONE [±]
If you cannot dial, change this setting depending
on your telephone line service.
“TONE” (default): For tone dial service.
“PULSE”: For rotary pulse dial service.
Code #17: Setting the ringer pattern
RINGER PATTERN
=A [±]
You can select “A” (default), “B” or “C”.
FL611AL-PFQX2169ZA-en.book Page 42 Thursday, February 24, 2005 11:37 AM