Printing (PC)
55
Side seam
construction
Peel-off strip Multiple flaps
Twist Curl Bent-edge
Wave Dog-ear Self adhesive
Clasp
Transparent window
Insert envelopes
as shown.
Adjust the
recording
paper
guides.
— High quality envelopes of
90
g
/m
2
paper,
— Envelopes that have thin, sharply creased leading
edges, and
— Envelopes that have diagonal seams as shown. (right)
●
You can load up to 10 envelopes of 90
g
/m
2
paper
at a
time for printing. Print side must face down.
●
Remove each envelope after printing.
●
Wrinkles may occur in some cases, even if high quality
envelopes are used.
●
Avoid printing in high humidity, above 70% relative
humidity (RH). High humidity may cause the envelope to
curl, pick up excess toner or seal the envelope.
●
Avoid printing below 10
°
C with less than 30% RH, or it
may cause light printing.
●
Store envelopes away from moisture and humidity, where
they can lay flat and their edges will not be bent or
damaged. The humidity should not exceed 70% RH.
Do not use envelopes with any of the following
characteristics (using these may result in paper jams):
●
Irregularly shaped envelopes
●
Envelopes with curls, wrinkles, nicks, twists,
dog-ears or other damage
●
Envelopes with side seam construction
●
Highly textured envelopes, or envelops with extremely
shiny surfaces
●
Envelopes that seal by removing a peel-off strip
●
Envelopes with more than one flap to be sealed
●
Self-adhesive envelopes
●
Envelopes that are baggy or not sharply creased
●
Embossed envelopes
●
Envelopes that have previously been printed on
●
Envelopes that include cotton and/or fibre material
Do not attempt to print on any of the following types of
envelopes (these may cause damage to the fax machine):
●
Envelopes with clasps, snaps or tie strings
●
Envelopes with transparent windows
●
Envelopes that use encapsulated types of adhesive that do
not require moistening but rely on pressure to seal them
Use envelopes designed for laser printing. We recommend the following:
Envelopes
KX-FLB756E (050-059) 03.2.19 4:20 PM Page 55