Filter
Top Products
10. Programmable Features
55
Receiving a fax into the
computer
{#}{4}{4}{2}
If you wish to receive a fax into the computer, activate this feature and run [PC
FAX] from Multi-Function Station.
{0} “OFF” (default): Deactivates this feature.
{1} “ALWAYS”: If the unit recognizes the connection to the computer, it will
transfer a received document to the computer. If the unit cannot recognize the
connection, it will store a received document in the memory once, then transfer
the data after recognition of the connection.
{2} “CONNECTED”: If the unit recognizes the connection to the computer, it will
transfer a received document to the computer. If the unit cannot recognize the
connection, it will print out the data.
Setting the computer for PC
fax reception (KX-FLM671,
LAN connection only)
{#}{4}{4}{3}
To select the computer that will be used for receiving a fax. See page 23 for
details.
Resetting fax features to their
default settings
{#}{4}{5}{9}
{0} “NO” (default)
{1} “YES”
To reset the fax features:
1. {Menu} i {#}{4}{5}{9}
2. Press {1} to select “YES”. i {Set} i {Set} i {Menu}
Note:
L The PC fax reception (feature #443 on page 23) will not be reset.
Feature/Code Selection