Filter
Top Products
1. Introduction and Installation
13
L Make sure the blue gear (1) and white
gear (4) are installed as shown.
5 Turn the blue gear (1) in the direction of the
arrow until the ink film is tight (2).
L Make sure that the ink film is wrapped
around the blue core (3) at least once.
6 Close the back cover securely by pushing
down on the notched area at both ends (1).
7 Close the front cover securely.
3
4
1
2
1
2
Correct
Tight
1 turn
Slack/Crease
Reverse
Incorrect
The ink film is not wrapped around the
blue core.
3
1
FP141-145AL.book Page 13 Tuesday, October 21, 2003 11:07 AM