Filter
Top Products
15
Setup
Tabs
Tabs
Slits
Slits
Paper tray
Paper tray!
Insert tabs on the paper tray into slits
on the back of the unit.
Note:
●
Do not place the unit in areas
where the paper tray may be
obstructed (i.e. by a wall, etc.).
Recording paper!
1
Fan the stack of paper to prevent a paper
jam.
2
Pull the tension plate forward and hold open
while inserting the paper.
●
The paper should not be over the tab.
●
If the paper is not inserted correctly,
readjust the paper, or the paper may jam.
Tab
Side to be
printed face
down.
Tension plate
Correct
Incorrect
Stack of
paper
To add paper
1. Pull the tension plate forward and hold open while
removing all of the installed paper.
2. Add paper to the stack of paper you removed and
straighten.
3. Fan the stack of paper.
4. Pull the tension plate forward and hold open while
inserting the paper.
Tension plate
A4-sized recording paper can be loaded. The unit can hold up to 50 sheets of 60 g/m
2
to 75 g/m
2
paper or 30 sheets of 90 g/m
2
paper.
See the note for paper specifications on page 84.