Filter
Top Products
Connections!
Telephone
line cord
Power cord
To the power outlet
(220 V–240 V, 50/60 Hz)
To the single
telephone line jack
Handset
cord
(For Australian users)
(
For New Zealand users
)
Connect to
“LINE”.
Connect the handset cord, and the telephone line cord, then the power cord.
Note:
●
If you want to connect an answering machine to this unit, see page 42 (KX-FP151 only).
Caution:
●
When you operate this product, the power outlet should be near the product and easily accessible.
●
Be sure to use the telephone line cord included in this unit.
●
Do not extend the telephone line cord.
16
Setup
To use the fax machine with a computer on the same line
●
We recommend you use separate wall jacks for the fax machine and the computer.
●
Set the fax machine to TEL mode (p. 38).
●
The device which has the shortest ring setting will answer the call first.
●
If the computer provides a port for a telephone line, connect the fax machine to this port on the computer.
Metal bar!
The recording paper will be ejected from the top of the unit after printing. The metal bar prevents
the printed paper from curling. Do not remove the metal bar.
If the bar comes off, attach it into the slots on the recording paper exit.
Metal bar
Printed paper
Slots
This model is designed to be
used in Australia and New
Zealand. TO USE IN NEW
ZEALAND, CHANGE THE
LOCATION SETTING (feature
#74 on page 70).