Filter
Top Products
1
Press p.
Display:
2
Select the feature you wish to program.
For basic features (p. 62, 63):
Press ( or ) until the desired
feature is displayed.
For advanced features (p. 64–71):
Press ( or ) until the following is
displayed:
then press w and press ( or ) until
the desired feature is displayed.
●
The current setting of the feature will be
displayed.
3
Press + or - until the desired setting
is displayed.
●
This step may be slightly different
depending on the feature.
4
Press w.
●
The setting you selected is set, and the
next feature will be displayed.
5
To exit programming, press p.
ADVANCED MODE
PRESS SET
SYSTEM SET UP
PRESS NAVI.[IH]
Features Summary
61
The unit provides various programming features. Program the desired settings by referring to the
programming tables (p. 62–71).
Programming!
MENU
SET
General programming method
Programming by entering the program code
number directly
You can select a feature by directly entering the program
code (# and 2-digit number) instead of using ( or )
in step 2.
1. Press p
.
2. Press # and the 2-digit code number.
3. Follow steps 3 to 5 above.
●
See programming tables for code numbers (p. 62–71).
To cancel programming
Press p to exit the program.