Filter
Top Products
Features Summary
66
Code Feature & Display Settings How the unit operates
(The default setting is in bold type.)
If you hear slow beeps, erase the
recorded messages (p. 52, 58).
The beeps will stop.
#43
ON
OFF
■
For KX-FP155 only:
Setting the recording time alert
To alert you with beeps when there
is less than 60 seconds of
remaining recording time.
REC. TIME ALERT
=OFF [±]
Advanced features (cont.)!
How to set menu options
Programming table (cont.)
Note:
●
Step 3 may be slightly different depending on the
feature.
●
See page 61 for more details.
1. Press p.
2. Press ( or ) until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
ADVANCED MODE
PRESS SET
3. Press + or - until the desired setting is
displayed.
4. Press w.
5. Press p.
#41
Changing the fax activation code
If you use an extension telephone
and wish to use it to receive a fax,
activate this feature, and enter the
code (p. 44).
●
This code is also used to receive
a voice message and a fax in the
same call (p. 43)(KX-FP151 only).
FAX ACTIVATION
=ON [±]
ON /
CODE=
??
9
OFF
1.
Follow steps 1 and 2 above.
2.
Press + or -
to select “ON”.
3. Press
w
.
4. Enter your code from 2 to 4 digits,
using 0–9 and
:
.
5. Press
w
.
6. Press
p
.
●
Do not enter “0000”.
If you hear slow beeps, press
LM and listen to
recorded messages (p. 52). The
beeps will stop.
#42
■
For KX-FP155 only:
Setting the message alert
To alert you with beeps when a
new voice message is recorded.
MESSAGE ALERT
=OFF [±]
ON
OFF