Filter
Top Products
25
Advanced
Operations
TEL/FAX mode
(automatic voice and fax recognition)
Use this mode when you wish to receive voice calls with rings, but do not want to hear the unit ring when
faxes are received.
When a call is received, the unit will work as follows.
A call is received.
The unit will automatically answer the line without ringing.
(A telephone fee will be charged to the caller.)
If extension telephones are connected, they will only ring before the call is answered.
The unit will now distinguish between a voice and fax call by detecting the calling tone.
Fax call Voice call
The unit will receive a document.
The unit will start to ring.
¡While ringing, the unit will emit a
different ring back tone to the calling
party.
Answer the call using the handset.
¡If you do not answer the call by a
preset number of rings, the facsimile
unit will switch to the fax.
Silent ring fax recognition system
\ Regarding the ringing pattern of extension phones and the facsimile unit, see “Helpful hints when
using the TEL/FAX mode” on the next page.
Note:
¡Some fax messages that are transmitted manually may not send a calling tone. These calls must be received
manually.