Filter
Top Products
58
CODE MEANINGPRINTED MESSAGE
Sample of journal report
Sample of transmission report
Communication messages on the report
When a problem has occurred, one of the following messages will be printed on the transmission and journal
reports.
COMMUNICATION ERROR
DOCUMENT JAMMED
ERROR-NOT YOUR UNIT
JUNKMAIL PROH. REJECT
MEMORY FULL
NO DOCUMENT
OTHER FAX NOT
RESPOND
PRESSED THE STOP KEY
THE COVER WAS OPENED
OK
¡A transmission or reception error occurred. Try again or check with
the other party.
¡A document is jammed. Remove the jammed document (p. 66).
¡A transmission or reception error occurred because of the trouble
of the other party’s machine. Check with the other party.
¡The junk mail prohibitor of your unit rejected fax reception.
¡The document was not received due to memory being full.
¡The document was not fed into the unit properly. Try again.
¡The receiving unit was busy or ran out of recording paper. Try
again.
¡The START/COPY/SET button was pressed when the document
was not set properly. Set the document properly and press the
START/COPY/SET button after confirming the fax tone.
¡The other party’s machine is not a facsimile. Check with the other
party.
¡The STOP button was pressed and fax communication was
canceled.
¡The front cover was opened during fax transmission.
¡Fax communication was successful.
41–72
FF
—
—
—
—
—
—
—
—
—
Jan. 25 1997 05:22PM
NO. OTHER FACSIMILE START TIME USAGE TIME MODE PAGES RESULT
UCODE
01 1234567 Jan. 21 02:14PM 00'25 TX 01 OK
02 9998765 Jan. 21 02:17PM 00'38 TX 02 OK
03 2121444 Jan. 21 02:18PM 00'28 RX 01 OK
04 555556677 Jan. 22 10:35AM 00'58 TX 03 COMMUNICATION ERROR (43)
05 +987 1234 Jan. 22 11:02AM 01'50 TX 05 OK
RX 03 OK
JOURNAL
Jan. 20 1997 01:19PM
NO. OTHER FACSIMILE START TIME USAGE TIME MODE PAGES RESULT
UCODE
01 COMPANY ABC Jan. 20 01:18PM 00'51 TX 00 COMMUNICATION ERROR (43)
XMT REPORT
Communication
messages
(See below.)
Error code
(for service
personnel
use only)