Filter
Top Products
1. Introduction and Installation
11
L Make sure the blue gear (2) and white gear (3)
are installed as shown.
5 Turn the blue gear (4) in the direction of the arrow
until the ink film is tight (5) and at least one layer of
ink film is wrapped around the blue core (6). 6 Close the back cover securely by pushing down on
the dotted area at both ends (7).
7 Close the front cover securely.
3
2
4
5
Correct
Incorrect
6
Tight
1 turn
No ink film is wrapped around the blue core.
Slack/Crease
Reverse
7
FP205-215AL-PFQX2516ZA-en.book Page 11 Thursday, July 13, 2006 9:31 AM