Filter
Top Products
11
Setting up the Unit
for Printing
Using manual feed
Use this procedure for thick paper (24 lb to 28 lb or 91 g/m
2
to 105 g/m
2
) or resume paper.
1
Pull the paper rest up until it stops.
2
Set the paper selection lever to the front position.
3
Insert a single sheet of paper into the paper tray.
¡Align the sheet with the right edge of the paper
tray.
¡Adjust the paper guide.
Note:
¡If you print from a Windows application, you must select Manual Feed in the printer driver.
Paper selection
lever
Paper guide
Note:
¡Do not insert paper of different thickness in the paper tray at same time. This may cause a paper jam.
¡Avoid extremely smooth or shiny paper that is highly textured. Also avoid coated, damaged, or wrinkled
paper and paper with a cotton and/or fiber content that is over 20%.
¡Avoid used paper for double-sided printing.
¡Do not use paper printed with this unit for double-sided printing with other copiers or printers, or a paper jam
may occur.
Note for loading transparencies:
¡Do not touch the printing area with your fingers. When you touch the film, the ink will smear.
¡When automatically feeding transparencies, remove each sheet after it is output. Otherwise the sheets may
stick together.
Paper rest