Filter
Top Products
13
Using Web Browser (continued)
Error information page
If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen, click
the part to display the details of the error.
Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.•
When [FAILED] has appeared for an item
Parameter Description
MAIN CPU BUS Trouble has occurred in the microcomputer circuitry. Consult your dealer.
FAN Trouble has occurred in the fan or its drive circuit. Consult your dealer.
INTAKE AIR TEMPERATURE
Intake air temperature is high. It could be because it is used in an environment of high
temperature such as close to a heating device, etc., the air intake is blocked, or the air
lter is clogged.
OPTICS MODULE TEMPERATURE Optics module temperature is high.
LAMP1-4 REMAIN TIME
The lamp runtime has exceeded the prescribed cumulative time, and it is now time to
replace the lamp.
LAMP1-4 STATUS
The lamp has failed to light.
Wait a short while for the lamp to cool off, and then turn on the power.
SHUTTER Trouble has occurred in the shutter.
AIR FILTER
Too much dust is on the air lter.
Check the air lter.
OK: Normal operation
FAILED:Occurrence of trouble