Filter
Top Products
E
NGLISH-43
Adjustments and settings
NOISE REDUCTION
(S-VIDEO/VIDEO only)
If the signal is of such poor quality
that picture interference appears,
set “NOISE REDUCTION” to “ON”.
To turn off the “NOISE
REDUCTION” feature, set to “OFF”.
STILL MODE
(S-VIDEO/VIDEO only)
To reduce flickering of still images
(vertical flicker), set “STILL MODE”
to “ON”.
This should normally be set to
“AUTO”. If the signal is of such poor
quality that the correct format
cannot be automatically
distinguished, change the setting
manually to the required TV system.
TV-SYSTEM
(S-VIDEO/VIDEO only)
NOTE:
BWhen set to “AUTO”, the
projector automatically
distinguishes between
NTSC/NTSC 4.43/PAL/PAL60/
PAL-M/PAL-N/SECAM signals.
NOTE:
BSet to “OFF” when playing
back moving images.