Filter
Top Products
Chapter 6 Appendix — Specications
ENGLISH - 133
Specications
The following table describes the specications of the projector.
Model No. PT-RZ470UK/PT-RZ470UW PT-RW430UK/PT-RW430UW
Power supply AC 100 V - 240 V 50 Hz/60 Hz
Power consumption
460 W (5.2 A - 2.0 A)
0.5 W when [STANDBY MODE] is set to [ECO]
8 W when [STANDBY MODE] is set to [NORMAL] (when fan is stopped)
DLP chip
Panel size 16.5 mm (0.65") (aspect ratio 16:9) 16.5 mm (0.65") (aspect ratio 16:10)
Display system 1-unit DLP chip, DLP type
Number of pixels
2 073 600 pixels
(1 920 x 1 080 dots)
1 024 000 pixels
(1 280 x 800 dots)
Lens
Zoom 1.5 to 2.9:1 1.5 to 3.1:1
Focus
F = 2.0 to 3.4
f = 21.5 mm to 43.0 mm
Light source Hybrid light source (LED/laser diode)
Light output
*1
3 500 lm (ANSI)
Contrast ratio
*1
20 000:1
Applicable
scanning
frequency
*2
For video signal Horizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 Hz
For RGB signal
Horizontal: 15 kHz to 100 kHz, Vertical: 24 Hz to 120 Hz
PIAS (Panasonic Intelligent Auto Scanning) system
Dot clock frequency
162 MHz or lower
For YC
B
C
R
/YP
B
P
R
signal
f 525i (480i)
Horizontal: 15.75 kHz, Vertical: 60 Hz
f 525p (480p)
Horizontal: 31.5 kHz, Vertical: 60 Hz
f 750 (720)/60p
Horizontal: 45 kHz, Vertical: 60 Hz
f 1125 (1035)/60i
Horizontal: 33.75 kHz, Vertical: 60 Hz
f 1125 (1080)/50i
Horizontal: 28.13 kHz, Vertical: 50 Hz
f 1125 (1080)/24sF
Horizontal: 27 kHz, Vertical: 48 Hz
f 1125 (1080)/30p
Horizontal: 33.75 kHz, Vertical: 30 Hz
f 1125 (1080)/50p
Horizontal: 56.25 kHz, Vertical: 50 Hz
f 625i (576i)
Horizontal: 15.63 kHz, Vertical: 50 Hz
f 625p (576p)
Horizontal: 31.25 kHz, Vertical: 50 Hz
f 750 (720)/50p
Horizontal: 37.5 kHz, Vertical: 50 Hz
f 1125 (1080)/60i
Horizontal: 33.75 kHz, Vertical: 60 Hz
f 1125 (1080)/24p
Horizontal: 27 kHz, Vertical: 24 Hz
f 1125 (1080)/25p
Horizontal: 28.13 kHz, Vertical: 25 Hz
f 1125 (1080)/60p
Horizontal: 67.5 kHz, Vertical: 60 Hz
For DVI-D signal
525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p,
1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,
1125 (1080)/60p, 1125 (1080)/50p
f Displayable resolution: VGA to WUXGA (non-interlaced)
WUXGA signal supports only VESA CVT-RB (Reduced Blanking) signal.
f Dot clock frequency: 25 MHz to 162 MHz
For HDMI signal
525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p,
1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,
1125 (1080)/60p, 1125 (1080)/50p
f Displayable resolution: VGA to WUXGA (non-interlaced)
WUXGA signal supports only VESA CVT-RB (Reduced Blanking) signal.
f Dot clock frequency: 25 MHz to 162 MHz
*1 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*2 Refer to “List of compatible signals” (x page 130) for the types of video signals that can be used with the projector.